Video on Wired && Coded;

[vid] A little ping-pong after the work

Sat, 14 Feb 2015 00:00:00 +0000

https://www.youtube.com/watch?v=dQuFrbmcv-0

Framebuffer Drawing with u8glib [VIDEO]

Wed, 02 Jul 2014 00:00:00 +0000

GDE021A1 is a graphics display with a resolution 172x72 pixels, each pixel is 2 bits deep (4 shades of grey). The display has an internal controller SSD1606 with a framebuffer. The framebuffer size is 172*72*2/8=3096 Bytes. When the display is powered up, the system processor sends initialization sequence that first sets up controller’s internal registers (the controller SSD1606 is fairly generic) and then sends new framebuffer content. The display controller then autonomously pushes the framebuffer contents to the physical screen.

The display controller can be configured to orient the framebuffer almost any way. I configured it into a landscape mode, with the X-axis going right and the Y-axis down, as shown on the photo.

EPD Display Working!

Wed, 18 Jun 2014 00:00:00 +0000

Today I have managed to get the GDE021A1 ePaper display (EPD) working! I used my minimal EPD-Driver board, which implements a flat-flex cable connector and a booster circuit for the display. The booster generates high voltages needed for display operation (around +-25V). The display is driven by STM32F101 Cortex-M3 CPU, mounted on a universal PCB. The picture below depicts my workbench setup (click to see a full-size image):

[caption id=“attachment_410” align=“aligncenter” width=“1205”] EPD Driver Prototype-workbench view with captions[/caption]