Tools on Wired && Coded;

Voltcraft VC-870 Multimeter Used With UNI-T UT-D04 USB Cable

Thu, 05 Jun 2014 00:00:00 +0000

Target hardware:

Software repository location:

https://github.com/jsyk/VC870_USB_Datalog

The issue this software solves: Although the Voltcraft multimeter and the UNI-T USB cable are hardware compatible (the USB cable adapter fits into the multimeter connector perfectly), the software requirements are different. Original Voltcraft USB cable, which costs tripple the UNI-T cable by the way, mimics RS232 adapter when plugged in USB host PC. The UNI-T cable uses different chip internally and behaves like a HID device. On the other hand, UNI-T multimeters use different communication protocol over the serial line than the VC870 does.

Philips PM3310 Digital Storage Oscilloscope

Wed, 14 May 2014 00:00:00 +0000

I got myself an old Philips PM3310 Digital Storage Oscilloscope (DSO). The scope has a classic CRT screen, but otherwise it is a fully digital device. The scope has two channels. Analogue bandwidth of the input attenuator/amplifier is 60MHz, which is not bad at all. Sampling frequency in real-time mode, however, is only 50 Mega samples per second. Each sampling ‘run’ after a trigger stores 256 samples into a RAM. The sample RAM has capacity for 4 independent waveforms. The 50M sampling speed allows single-shot time base up to 500ns/div, and a recurrent time base up to 5ns/div (sampling of repetitive signals in equivalent time). The internal CPU switches between the modes as needed.

Xilinx Vivado 2013.3 on Fedora 18: Working around a D-Bus bug

Sun, 10 Nov 2013 00:00:00 +0000

Running Xilinx Vivado 2013.3 (webpack license) on Fedora 18 may fail with the following error message:

$ vivado

****** Vivado v2013.3 (64-bit)
  **** SW Build 329390 on Wed Oct 16 18:26:55 MDT 2013
  **** IP Build 192953 on Wed Oct 16 08:44:02 MDT 2013
    ** Copyright 1986-1999, 2001-2013 Xilinx, Inc. All Rights Reserved.

INFO: [Common 17-78] Attempting to get a license: Implementation
process 17688: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 282.
This is normally a bug in some application using the D-Bus library.
  D-Bus not built with -rdynamic so unable to print a backtrace
Abnormal program termination (6)
Please check '/home/jara/hdl/hs_err_pid17688.log' for details

The workaround is to make the D-Bus communication socket file /var/run/dbus/system_bus_socket unavailable when the Xilinx tools run.